Electric forklifts mainly carry cargo in a fixed space, so how to drive an electric forklift? What is the specific method of use? Let’s listen to the introduction of electric forklift manufacturers.
Instructions for use of electric forklifts:
1. Depress the clutch pedal, start the engine, gradually refuel to raise the temperature of the engine, properly operate the multi-way valve, and lift the fork off the ground by about 15-20CM.
2. Switch to low gear, choose forward or backward gear, gently lift the clutch, slowly increase the throttle, and the forklift starts.
3. Alignment. Go to the pick-up place, slow down the speed, adjust the height and level of the fork, lightly step on the clutch, semi-linked. Adjust the direction until all forks fork into the goods, refuel to lift the forks, 15-20CM away from the ground.
4. When moving the forklift, the speed should be slow, the truck should be stable, and brakes should be used less.
5. Delivery. When the forklift arrives at the place where the goods are placed, slow down the vehicle and move the joystick gently. After the goods are stabilized, the forks can be emptied before returning.
The above is the specific method of opening the forklift. In addition, in the process of use, it should be flexibly operated according to the actual situation. Before operating, be sure to understand the operation manual of the forklift and understand some common faults.
Post time: Nov-30-2023