The main working environment of electric forklifts is warehouses, docks and other places, which need to transport heavy objects, so maintenance work needs to be done, otherwise it will bring potential safety hazards to operators. The following electric forklift manufacturers will share the maintenance content of electric forklifts:
1. Cleaning work. Clean the dirt and mud on the electric forklift, and focus on cleaning the forks and gate slides, generators, starters, electrode forks, water tanks, and air filters of forklift batteries.
2. Check the tightening of various parts of the electric forklift, such as: forklift support, lifting chain tensioning screws, wheel screws, wheel fixing pins, brakes, steering gear screws.
3. Check the reliability and flexibility of the foot brake and steering gear of the forklift. Check for leaks, forklift joints, diesel tank, oil tank, brake pump, lifting cylinder, tilt cylinder, water tank, water pump, engine oil pan, torque converter, transmission, drive axle, final drive, hydraulic steering , Steering cylinder.
4. Clean the sediment of the forklift oil filter. Replace the oil in the oil pan, check whether the crankcase ventilation connection is intact, and clean the oil filter and diesel filter element.
5. The electric forklift manufacturer reminds that during the maintenance process of the forklift, it is necessary to properly disassemble the parts. After the maintenance is completed, it must be assembled in time and the forklift road test should be carried out.
6. Check if the multi-directional valve, lift cylinder, tilt cylinder, steering cylinder and gear pump are working properly. Check whether the installation of the generator and the starter motor is firm, and whether the terminals are clean and firm, and check the carbon brush and commutator for wear.
7. Check the tightness of the forklift fan belt. Check whether the wheels are firmly installed, the air pressure of the tires is sufficient, and remove the debris embedded in the tread. Check the forklift diesel tank oil inlet filter for clogging and damage, clean or replace the filter.
The above is the forklift maintenance method introduced by the electric forklift manufacturer. In addition, you must master the correct operation skills during use. After using it, place it in a dry and hygienic place to avoid direct sunlight.
Post time: Dec-13-2023