I-1.5 ton Diesel Forklift ene-Japanese Engine 3M 4M 5M Lifting Height
Ukucaciswa
| Into | FD15 |
| Uhlobo lwamandla | Udizili |
| Amandla alinganiselwe | 1500kgs |
| Phakamisa Ukuphakama | 3000mm |
| Isikhungo Sokulayisha | 500mm |
| Usayizi Wemfoloko | 920L*120W*35Hmm |
| I-Mast Tilt angle(F/R) | 6°/12°Deg |
| I-FrontHang (Isikhungo Samasondo ukuya ebusweni bemfoloko) | 420 mm |
| I-Ground Clearance(Phansi kwensika) | 110mm |
| Ubude bubheke ebusweni bemfoloko (Ngaphandle kwemfoloko) | 2295 mm |
| Ububanzi Bebonke | 1086 mm |
| I-Mast Yehlisiwe Ukuphakama | 1995 mm |
| I-Mast Extended Height | 3940 mm |
| I-Overhead Guard Height | 2040 mm |
| Irediyasi ejikisayo(ngaphandle) | 2055 mm |
| Min.insecting ailse | 2150 mm |
| Ukuvakasha(Emptyload) | 15km/h |
| Ukuphakamisa (Umthwalo Ogcwele) | 450mm/s |
| I-Max.Gradeability | 20% |
| ITire Elingaphambili | 6.50-10-10PR |
| ITire elingemuva | 5.00-8-10PR |
| Isisekelo samasondo | 1400mm |
| Isisindo Sesevisi | 2820kgs |
| Ibhethri Voltage/Umthamo | 12/80V/AH |
| Imodeli Yenjini | I-C240PKJ-30 |
| Ukwakhiwa Kwenjini | ISUZU |
| Injini Ikalelwe ukuphuma/rpm | 35.4/2500kw |
| Injini Ilinganiselwe i-torque/rpm | 139/1800N·m |
| Inombolo Yenjini Yesilinda | 4 |
| I-Engine Bore*Stroke | 86*102mm |
| Ukususwa kwenjini | 2369cc |
| I-Engine Fuel Tank Capacity | 45L |
| Uhlobo Lokudlulisela | I-Hydraulic |
| Isiteji Sokudluliswa(FWD/RVS) | 1/1 |
| Ingcindezi Yokusebenza Yokunamathisela | 14.5Mpa |
IMINININGWANE YOMKHIQIZO
I-1.5 ton forklift 4 wheel iyimodeli ye-forklift enenjini.Ihlanganiswe ngezici zokuphepha ezisezingeni lomhlaba, ukusebenza okuhle kakhulu, amandla avelele okukhiqiza kanye ne-ergonomics esebenziseka kalula, imane isezingeni eliphezulu.Yakhelwe ngokuqinile futhi inokwethenjelwa okumangalisayo, isici se-forklift: Isistimu yokuphepha ye-Operator Presence Sensing kanye ne-Wide View Mast ukuze ibonakale kahle kakhulu.
PRODUCTIVITY
Izimfoloko ukuze kube lula ukubuyiswa kwephalethi.
I-Wide-view Mast inikeza umbono ongenakuqhathaniswa wezimfoloko kunoma iyiphi indawo
Izileveli zokulawula zinikeza ukushintsha okusheshayo, okulula phakathi kokuya phambili nokuhlehla.
I-tight turning radius inyusa ukuhamba nokuhamba ezindaweni ezincane ngokuvumelanisa isiteringi ne-engeli yamasondo angemuva.
UKUPHEPHA
I-Operator Presence Sensing (OPS) uhlelo lusiza ukuvimbela ukunyakaza ngengozi kwe-forklift kanye nezimfoloko uma u-opharetha engahlali kuzilawuli.Isistimu ye-OPS iyezwa uma u-opharetha ehlezi kahle futhi nasezilawulweni ngokusebenzisa iswishi yesihlalo.Uma u-opharetha ehlezi kahle kuzilawuli iswishi yesihlalo izovula ".
Uma u-opharetha engahlali ezilawulweni iswishi yesihlalo izovala ", futhi isistimu ye-OPS izokhubaza ikhono lokwehlisa izimfoloko, noma ukutshekela phambili noma emuva kanye nakho konke ukunyakaza kokulayisha nokuthulula.
UKUSEBENZA
I-ISUZU C240 Diesel Engine's 4 point mounting system yehlisa umsindo wenjini.
Uhlelo lwe-hydraulic lusiza ukunciphisa umsindo wenjini futhi lunciphise izindleko zokuyilungisa.
Isivinini sokuhamba esingenalutho esingu-15km/h singavikela ukuphepha komshayeli ne-forklift.
Ukuqina kwesakhiwo okukhulayo kuthuthukisa ukuqina kwe-chassis futhi kwandisa impilo yesevisi.
IDUDUZO/ERGONOMICS
Izilawuli ze-hydraulic ezifakwe nge-ergonomically zivumela ukusebenza okujabulisayo "kwamehlo phambili".
Isihlalo esilungisekayo, esinethezeke kakhulu sokumiswa kwe-Operator esinokusekelwa kwe-lumbar okukhethekile ukuze kube nenduduzo nokuvikelwa
Igumbi lomqhubi elinamandla elinendawo yonyawo ebanzi lisiza ukunciphisa ukukhathala komqhubi lapho eshayela isondo elingu-1.5 ton forklift 4.
Idizayini ye-forklift igxile ekuthuthukiseni ukubonakala komsebenzisi oya phambili, phansi, naphezulu.Iphaneli yensimbi ephansi, isikrini esibonisiwe esisusiwe, ukulungiswa kobubanzi bensika nezinye izici kuqinisekisa ukubonakala okumakiwe phambili ku-forklift.
KULULA UKUSEBENZISA
Isistimu yokuqapha edidiyelwe yokuxilonga ukuxazulula izinkinga nokusevisa ngokushesha, okulula.
Ihood yenjini ephakamisa kalula enomklamo wokufinyelela okubanzi kanye nentwasahlobo yegesi inikeza ukufinyelela okusheshayo enjinini.
I-floorboard engekho ithuluzi iyasuswa ngamasekhondi ukuze kusetshenziswe ngokushesha.
1. Uhlelo lokungenisa umoya
Ikhava kunogada ongaphezulu ubekwe phezulu kakhulu ukuvimbela izinhlayiya ukuthi zingangeni enjinini.
Imininingwane Izithombe
Izici
Induku yokudlala ye-1.Mechanical, kulula ukuyisebenzisa.
2.Insika eqinile, umthamo wokuthwala oqinile.
3.Isondo lokuqondisa lamandla e-Hydraulic, kulula ukushayela.
Ukukhanya kwe-4.LED, ukukhanya okuphezulu, ukonga amandla.
Amathayi enjoloba e-5.Engineering, afanele izindawo ezihlukahlukene zomgwaqo.
6.Electrophoretic spray paint, bushelelezi futhi akulula ukugqwala.
Iphrofayela Yenkampani
Yantai Shengrui Construction Machinery Equipment CO.,LTD.ingumthengisi ohamba phambili nochwepheshe wamaloli e-forklift e-China.Sikhiqiza kusuka ku-1-48t i-counterbalance counterbalance diesel forklift kagesi, iloli ye-forklift kagesi eyi-1-12t, i-3-10t side loader, i-4*4 ye-terrain terrain forklift, okokusebenza kwe-warehouse kanye nemishini yokusekela phansi nokunye.
Sinokwesekwa konjiniyela abaqeqeshiwe, Isungule ukuthengisa okuqinile kanye nenetha yenkonzo e-china yasekhaya, futhi yasungula izikhungo zokumaketha zaphesheya kwezilwandle ukuze zinikeze ukuthengisa, ukuthengisa emva kokuthengisa, ukuqasha nezinye izinsizakalo kumakhasimende omhlaba.kanye nethimba elisebenza kahle kakhulu lokuthengisa kanye nenani elincintisanayo masihehe amakhasimende avela emhlabeni wonke, sesivele sithekelisa emazweni angaphezu kuka-120, Sithunyelwa ikakhulukazi ezimakethe zaseYurophu, eMelika naseNingizimu-mpumalanga ye-Asia.
Amakhasimende amasha namadala amukelekile efekthri yethu, ngemizamo engapheli kanye nokuhlola iminyaka engu-20, imboni yethu ihlala inamathela kukhwalithi kuqala, ikhasimende kuqala, isevisi yezinga lokuqala, Ithuthuka njalo emikhiqizweni emisha, ithuthukisa ukusebenza komkhiqizo, nokuzibophezela ekuphathweni kwekhwalithi. , futhi silwela ukuhlinzeka ngemikhiqizo yekhwalithi ephezulu enesivinini esiphezulu, sikholwa ukuthi singabahlinzeki abathembekile bomshini wamaloli we-forklift, futhi Sibheke ngabomvu ukuthola ukubambisana okwengeziwe.
UMBONISO WE-WORKSHOP
Ukupakisha Nokulethwa
ISICELO
FAQ
I-Q1: Ingahlinzeka ngemikhiqizo eyenziwe ngokwezifiso?Imikhiqizo ye-OEM noma imikhiqizo ye-ODM?
A: Yebo, singakunikeza imikhiqizo eyenziwe ngokwezifiso ngokwesicelo sakho, kokubili i-OEM ne-ODM kwamukelekile.Senza imikhiqizo eminingi engeyona ejwayelekile, siyakwamukela i-reqeust yakho ekhethekile.
Q2: Kuthiwani ngesikhathi sokulethwa?
A: Ngokujwayelekile isikhathi sokukhiqiza siyizinsuku eziyi-15- 20 ngemuva kokuthola inkokhelo ethuthukisiwe.Kweminye imikhiqizo ejwayelekile, singase sibe nesitoko futhi singalethwa ngokushesha.
Q3: Kufanele senze kanjani uma umshini uphukile?
IMP: Ungakwazi ukusithathela ividiyo futhi ochwepheshe bethu bazohlaziya imbangela yenkinga ngokusekelwe kuvidiyo.
Q4: Singacela umbala wethu wemikhiqizo?
A: Yebo, kunjalo, udinga nje ukusinikeza ikhodi ye-RAL.
Q5: Kungani ngikhetha inkampani yakho?
A: 1.Sinikeza i-forklift yekhwalithi ephezulu
2. Sinethimba lochwepheshe bezobuchwepheshe, sinikezela ngenkonzo yamahora angama-24
Noma yimuphi umbuzo kanye nombuzo, pls xhumana nathi.
Lina WhatsApp/wechat:0086-15615658780，Email:Lina.group@hotmail.com
TIna WhatsApp/wechat:0086-13954599190，Email:Tina.group@Hotmail.com
